Certificate III in Carpentry

 
Qualification:
Certificate III   NRT
Course no:
CPC30211-01V03
National code:
CPC30211
Start date:
Mon 5 Feb 2018
 –   Gymea
 –   Randwick
  • Expand all
  • Carpentry course details

    Course description and aims

    This course is for apprentices in the carpentry trade.

    You will learn the basic foundations and content to develop the skills and knowledge used in the building and construction industry to efficiently produce
    quality work.

    You will also learn about safe work practices and about the context of the building industry.

    Course outcomes and careers

    Carpenter

    Entry requirements

    There are no educational entry requirements for this qualification.

    However, before enrolling in this course you must successfully complete the WHS
    Induction Training (White Card) which will allow you entry into a construction
    worksite.

    Enrol at any location

    Gymea
    Randwick
    Part Time Day
    Course type:
    Apprenticeship
    Course start:
    Mon 5 Feb 2018
    Course duration:
    3 Years
    Financial Assistance:
    Smart & Skilled
    Attendance:
    7 Hours per week
    Course Fee:
    $2000
    Code:
    CPC30211-01V03-18SUT-001
    View details
    About offering:

    INFORMATION SESSION

    Attend this information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.
     
    Wednesday, 24 January 2018 or Thursday 25 January 2018 between 1:00 p.m - 7:00 p.m at TAFE NSW Gymea, Corner of Hotham Road and Kingsway, Gymea, Block B, Room B1.21.

    NOTE: This offering is for eligiable apprentices. To enrol as an apprentice you will need to bring a completed copy of your Training Plan Proposal to the information/class allocation session.

    Indicative timetable:

    You will need to attend approximately 7 hours of class a week over 1 day. An indication of how yourweekly timetable may look is: Tuesday, 8:00am to 4:00pm or Friday, 8:00am to 4:00pm.

    How to enrol or apply:

    Before you can start an apprenticeship, you first need to find an employer in the industry you're interested in that will support you through your studies. You and your employer should contact an Apprenticeship Network Provider (APN) and tell them you're interested in studying at Sydney TAFE. The APN will help you and your employer to complete a Training Contract. Once you have a Training Contract, we will help you, your employer and the APN to complete a Training Plan Proposal. Once you have both these documents, the APN will lodge them with State Training Services, who will provide further advice about next steps.

    Find out more: http:// http://www.training.nsw.gov.au/individuals/apprenticeships_traineeships/getting_started/index.html

    Fee information:

    SMART AND SKILLED FEES

    This course is government-subsidised, meaning you pay a portion (capped at $2,000) of the full course fee to Sydney TAFE and the government will pay the balance. However, you must meet certain eligibility criteria for this to apply.

    The fee category that will apply to you depends on your eligibility and your individual circumstances. Your fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process.

    For further information about eligibility and explanations of the different fee categories, visit http://www.sydneytafe.edu.au/courses/smart-skilled.

    PAYMENT OPTIONS AND ASSISTANCE

    Instalment payment options are available for this course. For more information, see http://www.sydneytafe.edu.au/courses/fees-and-charges

    Find out more about financial assistance http://www.sydneytafe.edu.au/courses/financial-assistance

    RECOGNITION

    Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

    Find out more about recognition: http://www.sydneytafe.edu.au/courses/recognition

    Subjects

    NumberSubject nameNominal hours
    CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industry16
    CPCCCO2013ACarry out concreting to simple forms20
    CPCCCM2002ACarry out excavation16
    CPCCCA3001ACarry out general demolition of minor building structures32
    CPCCCM1015ACarry out measurements and calculations36
    CPCCCA3002ACarry out setting out30
    CPCCCM1014AConduct workplace communication8
    CPCCCA3009BConstruct advanced roofs64
    CPCCCA3005BConstruct ceiling frames24
    CPCCCA3008BConstruct eaves36
    CPCCCA3007CConstruct pitched roofs72
    CPCCCA3016AConstruct timber external stairs48
    CPCCCA3004AConstruct wall frames32
    CPCCCA2003AErect and dismantle formwork for footings and slabs on ground36
    CPCCCA3019AErect and dismantle formwork to suspended slabs, columns, beams and walls120
    CPCCCM2008BErect and dismantle restricted height scaffolding24
    CPCCCA3006BErect roof trusses36
    CPCCCA3012AFrame and fit wet area fixtures32
    CPCCCA2011AHandle carpentry materials40
    CPCCCA3010AInstall and replace windows and doors24
    CPCCCA3017BInstall exterior cladding36
    CPCCCA3003AInstall flooring systems32
    CPCCCM1013APlan and organise work12
    CPCCCM2001ARead and interpret plans and specifications16
    CPCCCA2002BUse carpentry tools and equipment36
    CPCCCM2007BUse explosive power tools8
    CPCCCM1012AWork effectively and sustainably in the construction industry12
    CPCCCM2010BWork safely at heights16
    Course start:
    Mon 5 Feb 2018
    Course duration:
    3 Years
    Financial Assistance:
    Smart & Skilled
    Attendance:
    7 Hours per week
    Smart and Skilled First Qual:
    $2990
    Smart and Skilled Second Qual:
    $3580
    Course Fee:
    $13940
    Code:
    CPC30211-01V03-18SUT-101
    View details
    About offering:

    INFORMATION SESSION

    Attend this information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.
     
    Wednesday 24 January 2018 or Thursday 25 January 2018 between 1:00pm - 7:00pm at TAFE NSW Gymea, Corner of Hotham Road and Kingsway, Gymea, Block B, Room B1.21.

    NOTE: This offering is for eligiable apprentices. To enrol as an apprentice you will need to bring a completed copy of your Training Plan Proposal to the information/class allocation session.

    Indicative timetable:

    You will need to attend approximately 7 hours of class a week over 1 day. An indication of how yourweekly timetable may look is: Tuesday, 8:00 a.m to 4:00 p.m or Friday, 8:00 a.m to 4:00 p.m.

    How to enrol or apply:

    Before you can start an apprenticeship, you first need to find an employer in the industry you're interested in that will support you through your studies. You and your employer should contact an Apprenticeship Network Provider (APN) and tell them you're interested in studying at Sydney TAFE. The APN will help you and your employer to complete a Training Contract. Once you have a Training Contract, we will help you, your employer and the APN to complete a Training Plan Proposal. Once you have both these documents, the APN will lodge them with State Training Services, who will provide further advice about next steps.

    Find out more: http:// http://www.training.nsw.gov.au/individuals/apprenticeships_traineeships/getting_started/index.html

    Fee information:

    SMART AND SKILLED FEES

    This course is government-subsidised, meaning you pay a portion (capped at $2,000) of the full course fee to Sydney TAFE and the government will pay the balance. However, you must meet certain eligibility criteria for this to apply.

    The fee category that will apply to you depends on your eligibility and your individual circumstances. Your fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process.

    For further information about eligibility and explanations of the different fee categories, visit http://www.sydneytafe.edu.au/courses/smart-skilled.

    PAYMENT OPTIONS AND ASSISTANCE

    Instalment payment options are available for this course. For more information, see http://www.sydneytafe.edu.au/courses/fees-and-charges

    Find out more about financial assistance http://www.sydneytafe.edu.au/courses/financial-assistance

    RECOGNITION

    Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

    Find out more about recognition: http://www.sydneytafe.edu.au/courses/recognition

    Subjects

    NumberSubject nameNominal hours
    CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industry16
    CPCCCO2013ACarry out concreting to simple forms20
    CPCCCM2002ACarry out excavation16
    CPCCCA3001ACarry out general demolition of minor building structures32
    CPCCCM1015ACarry out measurements and calculations36
    CPCCCA3002ACarry out setting out30
    CPCCCM1014AConduct workplace communication8
    CPCCCA3009BConstruct advanced roofs64
    CPCCCA3005BConstruct ceiling frames24
    CPCCCA3008BConstruct eaves36
    CPCCCA3007CConstruct pitched roofs72
    CPCCCA3016AConstruct timber external stairs48
    CPCCCA3004AConstruct wall frames32
    CPCCCA2003AErect and dismantle formwork for footings and slabs on ground36
    CPCCCA3019AErect and dismantle formwork to suspended slabs, columns, beams and walls120
    CPCCCM2008BErect and dismantle restricted height scaffolding24
    CPCCCA3006BErect roof trusses36
    CPCCCA3012AFrame and fit wet area fixtures32
    CPCCCA2011AHandle carpentry materials40
    CPCCCA3010AInstall and replace windows and doors24
    CPCCCA3017BInstall exterior cladding36
    CPCCCA3003AInstall flooring systems32
    CPCCCM1013APlan and organise work12
    CPCCCM2001ARead and interpret plans and specifications16
    CPCCCA2002BUse carpentry tools and equipment36
    CPCCCM2007BUse explosive power tools8
    CPCCCM1012AWork effectively and sustainably in the construction industry12
    CPCCCM2010BWork safely at heights16
    Part Time Day
    Part Time Evening
    Course type:
    Apprenticeship
    Course start:
    Mon 5 Feb 2018
    Course duration:
    3 Years
    Financial Assistance:
    Smart & Skilled
    Attendance:
    7 Hours per week
    Course Fee:
    $2000
    Code:
    CPC30211-01V03-18RDW-001
    View details
    About offering:

    INFORMATION SESSION

    Attend this information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Thursday 25 January 2018, 1:00pm to 7:00pm at TAFE NSW Randwick, Corner of Darley Road and Alison Road, Randwick, Building B, Level 2, Room B2.32.

    NOTE: This offering is for eligible Apprentices. Please bring a copy of your Training Plan Proposal/Apprenticeship Contract to orientation.
    Once training plan has been sighted and you have paid your first instalment, you will be provided with your timetable, assessment guides and the support services provided by TAFE NSW Randwick.

    Indicative timetable:

    You will need to attend approximately 7 hours of class a week over 1 day. An indication of how your weekly timetable may look is: one day per week 8:00am to 3:30pm.

    How to enrol or apply:

    Before you can start an apprenticeship, you first need to find an employer in the industry you're interested in that will support you through your studies. You and your employer should contact an Apprenticeship Network Provider (APN) and tell them you're interested in studying at Sydney TAFE. The APN will help you and your employer to complete a Training Contract. Once you have a Training Contract, we will help you, your employer and the APN to complete a Training Plan Proposal. Once you have both these documents, the APN will lodge them with State Training Services, who will provide further advice about next steps.

    Find out more: http:// http://www.training.nsw.gov.au/individuals/apprenticeships_traineeships/getting_started/index.html

    Fee information:

    SMART AND SKILLED FEES

    This course is government-subsidised, meaning you pay a portion (capped at $2,000) of the full course fee to Sydney TAFE and the government will pay the balance. However, you must meet certain eligibility criteria for this to apply.

    The fee category that will apply to you depends on your eligibility and your individual circumstances. Your fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process.

    For further information about eligibility and explanations of the different fee categories, visit http://www.sydneytafe.edu.au/courses/smart-skilled.

    PAYMENT OPTIONS AND ASSISTANCE

    Instalment payment options are available for this course. For more information, see http://www.sydneytafe.edu.au/courses/fees-and-charges

    Find out more about financial assistance http://www.sydneytafe.edu.au/courses/financial-assistance

    RECOGNITION

    Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

    Find out more about recognition: http://www.sydneytafe.edu.au/courses/recognition

    Subjects

    NumberSubject nameNominal hours
    CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industry16
    CPCCCO2013ACarry out concreting to simple forms20
    CPCCCM2002ACarry out excavation16
    CPCCCA3001ACarry out general demolition of minor building structures32
    CPCCCM1015ACarry out measurements and calculations36
    CPCCCA3002ACarry out setting out30
    CPCCCM1014AConduct workplace communication8
    CPCCCA3009BConstruct advanced roofs64
    CPCCCA3005BConstruct ceiling frames24
    CPCCCA3008BConstruct eaves36
    CPCCCA3007CConstruct pitched roofs72
    CPCCCA3016AConstruct timber external stairs48
    CPCCCA3004AConstruct wall frames32
    CPCCCA2003AErect and dismantle formwork for footings and slabs on ground36
    CPCCCA3019AErect and dismantle formwork to suspended slabs, columns, beams and walls120
    CPCCCM2008BErect and dismantle restricted height scaffolding24
    CPCCCA3006BErect roof trusses36
    CPCCCA3012AFrame and fit wet area fixtures32
    CPCCCA2011AHandle carpentry materials40
    CPCCCA3010AInstall and replace windows and doors24
    CPCCCA3017BInstall exterior cladding36
    CPCCCA3003AInstall flooring systems32
    CPCCCM1013APlan and organise work12
    CPCCCM2001ARead and interpret plans and specifications16
    CPCCCA2002BUse carpentry tools and equipment36
    CPCCCM2007BUse explosive power tools8
    CPCCCM1012AWork effectively and sustainably in the construction industry12
    CPCCCM2010BWork safely at heights16
    Course start:
    Mon 5 Feb 2018
    Course duration:
    3 Years
    Attendance:
    7 Hours per week
    Course Fee:
    $13940
    Code:
    CPC30211-01V03-18RDW-002
    View details
    About offering:

    INFORMATION SESSION

    Attend this information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Thursday 25 January 2018, 1:00pm to 7:00pm at TAFE NSW Randwick, Corner of Darley Road and Alison Road, Randwick, Building B, Level 2, Room B2.32.

    Indicative timetable:

    You will need to attend approximately 7 hours of class a week over 1 day. An indication of how your weekly timetable may look is: one day per week 8:00am to 3:30pm.

    How to enrol or apply:

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    RECOGNITION

    Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

    Find out more about recognition: http://www.sydneytafe.edu.au/courses/recognition

    READ BEFORE YOU ENROL

    Fees, payment and refunds: http://www.sydneytafe.edu.au/courses/fees-and-charges

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    Subjects

    NumberSubject nameNominal hours
    CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industry16
    CPCCCO2013ACarry out concreting to simple forms20
    CPCCCM2002ACarry out excavation16
    CPCCCA3001ACarry out general demolition of minor building structures32
    CPCCCM1015ACarry out measurements and calculations36
    CPCCCA3002ACarry out setting out30
    CPCCCM1014AConduct workplace communication8
    CPCCCA3009BConstruct advanced roofs64
    CPCCCA3005BConstruct ceiling frames24
    CPCCCA3008BConstruct eaves36
    CPCCCA3007CConstruct pitched roofs72
    CPCCCA3016AConstruct timber external stairs48
    CPCCCA3004AConstruct wall frames32
    CPCCCA2003AErect and dismantle formwork for footings and slabs on ground36
    CPCCCA3019AErect and dismantle formwork to suspended slabs, columns, beams and walls120
    CPCCCM2008BErect and dismantle restricted height scaffolding24
    CPCCCA3006BErect roof trusses36
    CPCCCA3012AFrame and fit wet area fixtures32
    CPCCCA2011AHandle carpentry materials40
    CPCCCA3010AInstall and replace windows and doors24
    CPCCCA3017BInstall exterior cladding36
    CPCCCA3003AInstall flooring systems32
    CPCCCM1013APlan and organise work12
    CPCCCM2001ARead and interpret plans and specifications16
    CPCCCA2002BUse carpentry tools and equipment36
    CPCCCM2007BUse explosive power tools8
    CPCCCM1012AWork effectively and sustainably in the construction industry12
    CPCCCM2010BWork safely at heights16
    Course type:
    Apprenticeship
    Course start:
    Mon 5 Feb 2018
    Course duration:
    3 Years
    Financial Assistance:
    Smart & Skilled
    Attendance:
    7 Hours per week
    Course Fee:
    $2000
    Code:
    CPC30211-01V03-18RDW-003
    View details
    About offering:

    INFORMATION SESSION

    Attend this information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Thursday, 25 January 2018, 1:00pm - 7:00pm at TAFE NSW Randwick, Corner of Darley Road and Alison Road, Randwick, Building B, Level 2, Room B2.32.

    NOTE: This offering is for eligible Apprentices. Please bring a copy of your Training Plan Proposal/Apprenticeship Contract to orientation.
    Once training plan has been sighted and you have paid your first instalment, you will be provided with your timetable, assessment guides and the support services provided by TAFE NSW Randwick.

    Indicative timetable:

    You will need to attend approximately 7 hours of class a week over 2 day. An indication of how your weekly timetable may look is: two nights per week from 5:30pm to 9:00pm.

    How to enrol or apply:

    Before you can start an apprenticeship, you first need to find an employer in the industry you're interested in that will support you through your studies. You and your employer should contact an Apprenticeship Network Provider (APN) and tell them you're interested in studying at Sydney TAFE. The APN will help you and your employer to complete a Training Contract. Once you have a Training Contract, we will help you, your employer and the APN to complete a Training Plan Proposal. Once you have both these documents, the APN will lodge them with State Training Services, who will provide further advice about next steps.

    Find out more: http:// http://www.training.nsw.gov.au/individuals/apprenticeships_traineeships/getting_started/index.html

    Fee information:

    SMART AND SKILLED FEES

    This course is government-subsidised, meaning you pay a portion (capped at $2,000) of the full course fee to Sydney TAFE and the government will pay the balance. However, you must meet certain eligibility criteria for this to apply.

    The fee category that will apply to you depends on your eligibility and your individual circumstances. Your fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process.

    For further information about eligibility and explanations of the different fee categories, visit http://www.sydneytafe.edu.au/courses/smart-skilled.

    PAYMENT OPTIONS AND ASSISTANCE

    Instalment payment options are available for this course. For more information, see http://www.sydneytafe.edu.au/courses/fees-and-charges

    Find out more about financial assistance http://www.sydneytafe.edu.au/courses/financial-assistance

    RECOGNITION

    Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

    Find out more about recognition: http://www.sydneytafe.edu.au/courses/recognition

    Subjects

    NumberSubject nameNominal hours
    CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industry16
    CPCCCO2013ACarry out concreting to simple forms20
    CPCCCM2002ACarry out excavation16
    CPCCCA3001ACarry out general demolition of minor building structures32
    CPCCCM1015ACarry out measurements and calculations36
    CPCCCA3002ACarry out setting out30
    CPCCCM1014AConduct workplace communication8
    CPCCCA3009BConstruct advanced roofs64
    CPCCCA3005BConstruct ceiling frames24
    CPCCCA3008BConstruct eaves36
    CPCCCA3007CConstruct pitched roofs72
    CPCCCA3016AConstruct timber external stairs48
    CPCCCA3004AConstruct wall frames32
    CPCCCA2003AErect and dismantle formwork for footings and slabs on ground36
    CPCCCA3019AErect and dismantle formwork to suspended slabs, columns, beams and walls120
    CPCCCM2008BErect and dismantle restricted height scaffolding24
    CPCCCA3006BErect roof trusses36
    CPCCCA3012AFrame and fit wet area fixtures32
    CPCCCA2011AHandle carpentry materials40
    CPCCCA3010AInstall and replace windows and doors24
    CPCCCA3017BInstall exterior cladding36
    CPCCCA3003AInstall flooring systems32
    CPCCCM1013APlan and organise work12
    CPCCCM2001ARead and interpret plans and specifications16
    CPCCCA2002BUse carpentry tools and equipment36
    CPCCCM2007BUse explosive power tools8
    CPCCCM1012AWork effectively and sustainably in the construction industry12
    CPCCCM2010BWork safely at heights16
    Course start:
    Mon 5 Feb 2018
    Course duration:
    3 Years
    Attendance:
    7 Hours per week
    Course Fee:
    $13940
    Code:
    CPC30211-01V03-18RDW-004
    View details
    About offering:

    INFORMATION SESSION

    Attend this information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Thursday 25 January 2018, 1:00pm - 7:00pm at TAFE NSW Randwick, Corner of Darley Road and Alison Road, Randwick, Building B, Level 2, Room B2.32.

    Indicative timetable:

    You will need to attend approximately 7 hours of class a week over 2 day. An indication of how your weekly timetable may look is: two nights per week 5:30pm to 9:00pm.

    How to enrol or apply:

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    RECOGNITION

    Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

    Find out more about recognition: http://www.sydneytafe.edu.au/courses/recognition

    READ BEFORE YOU ENROL

    Fees, payment and refunds: http://www.sydneytafe.edu.au/courses/fees-and-charges

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    Subjects

    NumberSubject nameNominal hours
    CPCCOHS2001AApply OHS requirements, policies and procedures in the construction industry16
    CPCCCO2013ACarry out concreting to simple forms20
    CPCCCM2002ACarry out excavation16
    CPCCCA3001ACarry out general demolition of minor building structures32
    CPCCCM1015ACarry out measurements and calculations36
    CPCCCA3002ACarry out setting out30
    CPCCCM1014AConduct workplace communication8
    CPCCCA3009BConstruct advanced roofs64
    CPCCCA3005BConstruct ceiling frames24
    CPCCCA3008BConstruct eaves36
    CPCCCA3007CConstruct pitched roofs72
    CPCCCA3016AConstruct timber external stairs48
    CPCCCA3004AConstruct wall frames32
    CPCCCA2003AErect and dismantle formwork for footings and slabs on ground36
    CPCCCA3019AErect and dismantle formwork to suspended slabs, columns, beams and walls120
    CPCCCM2008BErect and dismantle restricted height scaffolding24
    CPCCCA3006BErect roof trusses36
    CPCCCA3012AFrame and fit wet area fixtures32
    CPCCCA2011AHandle carpentry materials40
    CPCCCA3010AInstall and replace windows and doors24
    CPCCCA3017BInstall exterior cladding36
    CPCCCA3003AInstall flooring systems32
    CPCCCM1013APlan and organise work12
    CPCCCM2001ARead and interpret plans and specifications16
    CPCCCA2002BUse carpentry tools and equipment36
    CPCCCM2007BUse explosive power tools8
    CPCCCM1012AWork effectively and sustainably in the construction industry12
    CPCCCM2010BWork safely at heights16

     

     

    Scholarships

    Female students at Sydney TAFE

     

    A scholarship can help with fees and related study expenses.
    Find out if you are eligible.