Diploma of Work Health and Safety

 
Qualification:
Diploma   NRT
Course no:
BSB51315R1-01V01
National code:
BSB51315
Start date:
Sat 4 Aug 2018
Sat 13 Oct 2018
 –   St George
 –   Ultimo
  • Expand all
  • Work Health and Safety course details

    Course description and aims

    This qualification is suitable for people who coordinate and maintain the Work Health and Safety (WHS) program in an organisation. It reflects the role of practitioners who apply a substantial knowledge base and well-developed skills in a wide variety of WHS contexts.

    Licensing/Regulatory Information
    No licensing, legislative or certification requirements apply to this qualification at the time of publication.

    Course outcomes and careers

    WHS Manager, WHS Consultant, Safety Manager, WHS Practitioner, Senior WHS Officer

    Entry requirements

    All core units in BSB41415 Certificate IV in Work Health and Safety or equivalent competencies.

    Equivalent competencies are predecessors to the following units which have been mapped as equivalent:
    * BSBWHS402 Assist with compliance with WHS laws
    * BSBWHS403 Contribute to implementing and maintaining WHS consultation and participation processes
    * BSBWHS404 Contribute to WHS hazard identification, risk assessment and risk control
    * BSBWHS405 Contribute to implementing and maintaining WHS management systems
    * BSBWHS406 Assist with responding to incidents

    Enrol at any location

    St George
    Ultimo
    Online
    Flexible
    Course start:
    Sat 4 Aug 2018
    Course duration:
    18 Weeks
    Financial Assistance:
    VET Student Loan
    Attendance:
    6 Hours per week
    Code:
    BSB51315R1-01V01-18SGR-102
    View details
    Indicative timetable:

    Online each week via the moodle. You will need to spend approximately between 10 to 12 hours per week completing activities and assessment tasks as per the course timetable.

    How to enrol or apply:

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    PAYMENT OPTIONS AND ASSISTANCE

    This course is approved for a Commonwealth VET Student Loan (VSL). If you meet the VSL eligibility and academic suitability requirements, you are able to apply to the Commonwealth for a loan to cover all or part of your course fee. We will ask you whether you would like to apply for a VET Student Loan when you enrol and advise you of the process.

    Find out more about VET Student Loans at http://studyassist.gov.au/sites/studyassist/vet%20student%20loans/pages/vet%20student%20loans

    Direct payment by Unit of Study instalments is available for this course.

    The Units of Study and associated fees for this course are detailed below. Fees are charged on the census day for each unit of study. To secure a loan for part or all of your course, you must be eligible and submit a valid application to the Commonwealth for a VET Student Loan. You may withdraw prior to the census date without incurring a fee.

    Find out about recognition: http://www.sydneytafe.edu.au/courses/recognition

    ADDITIONAL RESOURCES

    All required learning resources will be made available to you on the course moodle. READ BEFORE YOU ENROL

    Fees, payment and refunds: http://www.sydneytafe.edu.au/courses/fees-and-charges

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    Other Information:

    As this is an online course and weekly course work will be made available to you on Saturdays.

    There will be scheduled LIVE webinars throughout the delivery of each unit.

    If you are unable to attend the LIVE webinars, all information and recordings are posted on the moodle for you to access.

    Your teacher will be available to support your learning journey using a variety of strategies such as: LIVE FORUM access, announcements, emails, one on one sessions as required either on campus or using technology.

    INFORMATION SESSION

    Attend the following information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Wednesday 25 July 2018 at 06:00pm St. George Campus, Cnr Princes Highway & President Avenue, Building F, Lower Ground Floor, Room FLG19.

    NOTE workshops are held at St George campus once you enrol. Duration: 18 weeks.

    Did you know as a TAFE NSW student you have unlimited access to Lynda.com which is an online library of video courses in software, design, technology, communication, learning and business. These skills can help you to achieve your study goals. Visit the Student Portal to get started.

    Units of Study

    CodeNameStart DateEnd DateCensusAmount
    UOS VSL-Diploma of Work Health and Safety 2018/08/062018/09/142018/09/03$2260.00
    UOS VSL-Diploma of Work Health and Safety 2018/09/172018/10/262018/10/02$2260.00
    UOS VSL-Diploma of Work Health and Safety 2018/10/292018/12/072018/12/03$2260.00

    Subjects

    NumberSubject nameNominal hours
    BSBWHS408Assist with effective WHS management of contractors30
    BSBWHS506Contribute to developing, implementing and maintaining WHS management systems50
    BSBWHS510Contribute to implementing emergency procedures40
    BSBWHS503Contribute to the systematic management of WHS risk40
    BSBWHS505Investigate WHS incidents50
    BSBWHS502Manage effective WHS consultation and participation processes40
    BSBHRM509Manage rehabilitation or return to work programs50
    BSBWHS508Manage WHS hazards associated with plant60
    BSBWHS504Manage WHS risks50
    Course start:
    Sat 4 Aug 2018
    Course duration:
    18 Weeks
    Financial Assistance:
    Smart & Skilled, VET Student Loan
    Attendance:
    6 Hours per week
    Indicative course cost:
    $2850
    Code:
    BSB51315R1-01V01-18SGR-002
    View details
    Indicative timetable:

    Online each week via the moodle. You will need to spend approximately between 10 to 12 hours per week completing activities and assessment tasks as per the course timetable.

    How to enrol or apply:

    To apply for this course you must meet the Smart and Skilled eligibility criteria: http://www.sydneytafe.edu.au/courses/smart-skilled

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    SMART AND SKILLED FEES

    Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process.

    For further information about eligibility and explanations of the different fee categories, visit http://www.sydneytafe.edu.au/courses/smart-skilled.

    PAYMENT OPTIONS AND ASSISTANCE

    This course is approved for a Commonwealth VET Student Loan (VSL). If you meet the VSL eligibility and academic suitability requirements, you are able to apply to the Commonwealth for a loan to cover all or part of your course fee. We will ask you whether you would like to apply for a VET Student Loan when you enrol and advise you of the process.

    Find out more about VET Student Loans at http://studyassist.gov.au/sites/studyassist/vet%20student%20loans/pages/vet%20student%20loans

    Direct payment by Unit of Study instalments is available for this course.

    The Units of Study and associated fees for this course are detailed below. Fees are charged on the census day for each unit of study. To secure a loan for part or all of your course, you must be eligible and submit a valid application to the Commonwealth for a VET Student Loan. You may withdraw prior to the census date without incurring a fee.

    Find out about recognition: http://www.sydneytafe.edu.au/courses/recognition

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    ADDITIONAL RESOURCES

    All required learning resources will be made available to you on the course moodle.

    Other Information:

    There will be a pre-enrolment Information Session held on Wednesday 25th July 2018 at 6:00pm at St George Campus, Building F, Lower Ground Floor, Room FLG19. If you want to find out whether this course best suits your career plan, please attend.

    NOTE workshops are held at St George campus once you enrol. Duration: 18 weeks.

    As this is an online course and weekly course work will be made available to you on Saturdays. There will be scheduled LIVE webinars throughout the delivery of each unit. If you are unable to attend the LIVE webinars, all information and recordings are posted on the moodle for you to access.

    Your teacher will be available to support your learning journey using a variety of strategies such as: LIVE FORUM access, announcements, emails, one on one sessions as required either on campus or using technology.

    Did you know as a TAFE NSW student you have unlimited access to Lynda.com which is an online library of video courses in software, design, technology, communication, learning and business. These skills can help you to achieve your study goals. Visit the Student Portal to get started.

    Units of Study

    CodeNameStart DateEnd DateCensusAmount
    UOS VSL-Diploma of Work Health and Safety 2018/08/062018/09/142018/09/03$950.00
    UOS VSL-Diploma of Work Health and Safety 2018/09/172018/10/262018/10/02$950.00
    UOS VSL-Diploma of Work Health and Safety 2018/10/292018/12/072018/12/03$950.00

    Subjects

    NumberSubject nameNominal hours
    BSBWHS408Assist with effective WHS management of contractors30
    BSBWHS506Contribute to developing, implementing and maintaining WHS management systems50
    BSBWHS510Contribute to implementing emergency procedures40
    BSBWHS503Contribute to the systematic management of WHS risk40
    BSBWHS505Investigate WHS incidents50
    BSBWHS502Manage effective WHS consultation and participation processes40
    BSBHRM509Manage rehabilitation or return to work programs50
    BSBWHS508Manage WHS hazards associated with plant60
    BSBWHS504Manage WHS risks50
    Course start:
    Sat 13 Oct 2018
    Course duration:
    18 Weeks
    Financial Assistance:
    Smart & Skilled, VET Student Loan
    Attendance:
    6 Hours per week
    Indicative course cost:
    $2850
    Code:
    BSB51315R1-01V01-18SGR-003
    View details
    About offering:

    Online each week via the moodle. You will need to spend approximately between 10 to 12 hours per week completing activities and assessment tasks as per the course timetable. As this is an online course and weekly course work will be made available to you on Saturdays. There will be scheduled LIVE webinars throughout the delivery of each unit. If you are unable to attend the LIVE webinars, all information and recordings are posted on the moodle for you to access. Your teacher will be available to support your learning journey using a variety of strategies such as: LIVE FORUM access, announcements, emails, one on one sessions as required either on campus or using technology.

    Indicative timetable:

    This course is delivered completely online. Once enrolled you'll have between 10 to 12 hours per week completing activities and assessments tasks.

    How to enrol or apply:

    To apply for this course you must meet the Smart and Skilled eligibility criteria: http://www.sydneytafe.edu.au/courses/smart-skilled

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    SMART AND SKILLED FEES

    Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process.

    For further information about eligibility and explanations of the different fee categories, visit http://www.sydneytafe.edu.au/courses/smart-skilled.

    PAYMENT OPTIONS AND ASSISTANCE

    This course is approved for a Commonwealth VET Student Loan (VSL). If you meet the VSL eligibility and academic suitability requirements, you are able to apply to the Commonwealth for a loan to cover all or part of your course fee.

    We will ask you whether you would like to apply for a VET Student Loan when you enrol and advise you of the process.

    Find out more about VET Student Loans at http://studyassist.gov.au/sites/studyassist/vet%20student%20loans/pages/vet%20student%20loans

    Direct payment by Unit of Study instalments is available for this course.

    The Units of Study and associated fees for this course are detailed below. Fees are charged on the census day for each unit of study. To secure a loan for part or all of your course, you must be eligible and submit a valid application to the Commonwealth for a VET Student Loan. You may withdraw prior to the census date without incurring a fee.

    Find out about recognition: http://www.sydneytafe.edu.au/courses/recognition

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    ADDITIONAL RESOURCES

    All required learning resources will be made available to you on the course moodle.

    Other Information:

    INFORMATION SESSION

    Attend the following information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Wednesday 26 September 2018 at 06:00pm at St George Campus, Cnr Princes Highway & President Avenue, Building F, Lower Ground Floor, Room FLG19.

    Did you know as a TAFE NSW student you have unlimited access to Lynda.com which is an online library of video courses in software, design, technology, communication, learning and business. These skills can help you to achieve your study goals. Visit the Student Portal to get started.

    Units of Study

    CodeNameStart DateEnd DateCensusAmount
    UOS VSL-Diploma of Work Health and Safety 2018/10/152018/12/072018/11/05$950.00
    UOS VSL-Diploma of Work Health and Safety 2018/12/102019/02/082019/01/07$950.00
    UOS VSL-Diploma of Work Health and Safety 2019/02/112019/04/052019/03/04$950.00

    Subjects

    NumberSubject nameNominal hours
    BSBWHS408Assist with effective WHS management of contractors30
    BSBWHS506Contribute to developing, implementing and maintaining WHS management systems50
    BSBWHS510Contribute to implementing emergency procedures40
    BSBWHS503Contribute to the systematic management of WHS risk40
    BSBWHS505Investigate WHS incidents50
    BSBWHS502Manage effective WHS consultation and participation processes40
    BSBHRM509Manage rehabilitation or return to work programs50
    BSBWHS508Manage WHS hazards associated with plant60
    BSBWHS504Manage WHS risks50
    Course start:
    Sat 13 Oct 2018
    Course duration:
    18 Weeks
    Financial Assistance:
    Smart & Skilled, VET Student Loan
    Attendance:
    6 Hours per week
    Indicative course cost:
    $2850
    Code:
    BSB51315R1-01V01-18SGR-104
    View details
    Indicative timetable:

    Workshops are held at St George Campus on ALTERNATE Saturdays 9am - 4pm. Therefore you only attend campus 9 Saturdays from the 18 week timetable.

    How to enrol or apply:

    To apply for this course you must meet the Smart and Skilled eligibility criteria: http://www.sydneytafe.edu.au/courses/smart-skilled

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    SMART AND SKILLED FEES

    Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process.

    For further information about eligibility and explanations of the different fee categories, visit http://www.sydneytafe.edu.au/courses/smart-skilled.

    PAYMENT OPTIONS AND ASSISTANCE

    This course is approved for a Commonwealth VET Student Loan (VSL). If you meet the VSL eligibility and academic suitability requirements, you are able to apply to the Commonwealth for a loan to cover all or part of your course fee.

    We will ask you whether you would like to apply for a VET Student Loan when you enrol and advise you of the process.

    Find out more about VET Student Loans at http://studyassist.gov.au/sites/studyassist/vet%20student%20loans/pages/vet%20student%20loans

    Direct payment by Unit of Study instalments is available for this course.

    The Units of Study and associated fees for this course are detailed below. Fees are charged on the census day for each unit of study. To secure a loan for part or all of your course, you must be eligible and submit a valid application to the Commonwealth for a VET Student Loan. You may withdraw prior to the census date without incurring a fee.

    Find out about recognition: http://www.sydneytafe.edu.au/courses/recognition

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    ADDITIONAL RESOURCES

    All required learning resources will be made available to you on the course moodle.

    Other Information:

    The course timetable clearly identifies which Saturdays are workshops and which are designated online sessions. Online sessions can be completed at a time and place that suits you. Your teacher will guide your learning and tasks during the online weeks. Your teacher will supplement campus workshops with online webinars that are recorded for your convenience. Your teacher will also be available to answer questions, engage learners at a set day/time during the scheduled online week. Once you are enroled you have up to 18 weeks to complete the course work. You will be required to do approximately 10 to 12 hours per week on set activities and assessment tasks each week. This is a fast paced course that requires you to work each week and manage your time effectively.

    INFORMATION SESSION

    Attend the following information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Wednesday 26 September 2018 at 06:00pm at St George Campus, Cnr Princes Highway & President Avenue, Building F, Lower Ground Floor, Room FLG19.

    If you want to find out whether this course best suits your career plan, please attend.

    NOTE workshops are held at St George campus once you enrol. Duration: 18 weeks.

    Did you know as a TAFE NSW student you have unlimited access to Lynda.com which is an online library of video courses in software, design, technology, communication, learning and business. These skills can help you to achieve your study goals. Visit the Student Portal to get started.

    Units of Study

    CodeNameStart DateEnd DateCensusAmount
    UOS VSL-Diploma of Work Health and Safety 2018/10/152018/12/072018/11/05$950.00
    UOS VSL-Diploma of Work Health and Safety 2018/12/102019/02/082019/01/07$950.00
    UOS VSL-Diploma of Work Health and Safety 2019/02/112019/04/052019/03/04$950.00

    Subjects

    NumberSubject nameNominal hours
    BSBWHS408Assist with effective WHS management of contractors30
    BSBWHS506Contribute to developing, implementing and maintaining WHS management systems50
    BSBWHS510Contribute to implementing emergency procedures40
    BSBWHS503Contribute to the systematic management of WHS risk40
    BSBWHS505Investigate WHS incidents50
    BSBWHS502Manage effective WHS consultation and participation processes40
    BSBHRM509Manage rehabilitation or return to work programs50
    BSBWHS508Manage WHS hazards associated with plant60
    BSBWHS504Manage WHS risks50
    Course start:
    Sat 4 Aug 2018
    Course duration:
    18 Weeks
    Financial Assistance:
    VET Student Loan
    Attendance:
    6 Hours per week
    Code:
    BSB51315R1-01V01-18SGR-100
    View details
    Indicative timetable:

    Workshops are held at St George Campus on ALTERNATE Saturdays. Therefore you only attend campus 9 Saturdays from the 18 week timetable. Workshops start at 09:00am and are scheduled to end at 04:00pm.

    How to enrol or apply:

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    PAYMENT OPTIONS AND ASSISTANCE

    This course is approved for a Commonwealth VET Student Loan (VSL). If you meet the VSL eligibility and academic suitability requirements, you are able to apply to the Commonwealth for a loan to cover all or part of your course fee. We will ask you whether you would like to apply for a VET Student Loan when you enrol and advise you of the process.

    Find out more about VET Student Loans at http://studyassist.gov.au/sites/studyassist/vet%20student%20loans/pages/vet%20student%20loans

    Direct payment by Unit of Study instalments is available for this course.

    The Units of Study and associated fees for this course are detailed below. Fees are charged on the census day for each unit of study. To secure a loan for part or all of your course, you must be eligible and submit a valid application to the Commonwealth for a VET Student Loan. You may withdraw prior to the census date without incurring a fee.

    Find out about recognition: http://www.sydneytafe.edu.au/courses/recognition

    ADDITIONAL RESOURCES

    All required learning resources will be made available to you on the course moodle. READ BEFORE YOU ENROL

    Fees, payment and refunds: http://www.sydneytafe.edu.au/courses/fees-and-charges

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    Other Information:

    The course timetable clearly identifies which Saturdays are workshops and which are designated online sessions.

    Online sessions can be completed at a time and place that suits you. Your teacher will guide your learning and tasks during the online weeks.

    Your teacher will supplement campus workshops with online webinars that are recorded for your convenience.

    Your teacher will also be available to answer questions, engage learners at a set day/time during the scheduled online week.

    Once you are enroled you have up to 18 weeks to complete the course work. You will be required to do approximately 10 to 12 hours per week on set activities and assessment tasks each week.

    This is a fast paced course that requires you to work each week and manage your time effectively.

    INFORMATION SESSION

    Attend the following information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Wednesday 25th July 2018 at 06:00pm at St.George Campus, Cnr Princes Highway & President Avenue, Building F, Lower Ground Floor, Room FLG19.

    If you want to find out whether this course best suits your career plan, please attend.

    NOTE workshops are held at St George campus once you enrol. Duration: 18 weeksDid you know as a TAFE NSW student you have unlimited access to Lynda.com which is an online library of video courses in software, design, technology, communication, learning and business. These skills can help you to achieve your study goals. Visit the Student Portal to get started.

    Units of Study

    CodeNameStart DateEnd DateCensusAmount
    UOS VSL-Diploma of Work Health and Safety 2018/08/062018/09/142018/09/03$2260.00
    UOS VSL-Diploma of Work Health and Safety 2018/09/172018/10/262018/10/02$2260.00
    UOS VSL-Diploma of Work Health and Safety 2018/10/292018/12/072018/12/03$2260.00

    Subjects

    NumberSubject nameNominal hours
    BSBWHS408Assist with effective WHS management of contractors30
    BSBWHS506Contribute to developing, implementing and maintaining WHS management systems50
    BSBWHS510Contribute to implementing emergency procedures40
    BSBWHS503Contribute to the systematic management of WHS risk40
    BSBWHS505Investigate WHS incidents50
    BSBWHS502Manage effective WHS consultation and participation processes40
    BSBHRM509Manage rehabilitation or return to work programs50
    BSBWHS508Manage WHS hazards associated with plant60
    BSBWHS504Manage WHS risks50
    Course start:
    Sat 4 Aug 2018
    Course duration:
    18 Weeks
    Financial Assistance:
    Smart & Skilled, VET Student Loan
    Attendance:
    6 Hours per week
    Indicative course cost:
    $2850
    Code:
    BSB51315R1-01V01-18SGR-001
    View details
    Indicative timetable:

    Workshops are held at St George Campus on ALTERNATE Saturdays. Therefore you only attend campus 9 Saturdays from the 18 week timetable. Workshops start at 09:00am and are scheduled to end at 04:00pm.

    How to enrol or apply:

    To apply for this course you must meet the Smart and Skilled eligibility criteria: http://www.sydneytafe.edu.au/courses/smart-skilled

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    SMART AND SKILLED FEES

    Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process.

    For further information about eligibility and explanations of the different fee categories, visit http://www.sydneytafe.edu.au/courses/smart-skilled.

    PAYMENT OPTIONS AND ASSISTANCE

    This course is approved for a Commonwealth VET Student Loan (VSL). If you meet the VSL eligibility and academic suitability requirements, you are able to apply to the Commonwealth for a loan to cover all or part of your course fee. We will ask you whether you would like to apply for a VET Student Loan when you enrol and advise you of the process.

    Find out more about VET Student Loans at http://studyassist.gov.au/sites/studyassist/vet%20student%20loans/pages/vet%20student%20loans

    Direct payment by Unit of Study instalments is available for this course.

    The Units of Study and associated fees for this course are detailed below. Fees are charged on the census day for each unit of study. To secure a loan for part or all of your course, you must be eligible and submit a valid application to the Commonwealth for a VET Student Loan. You may withdraw prior to the census date without incurring a fee.

    Find out about recognition: http://www.sydneytafe.edu.au/courses/recognition

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    ADDITIONAL RESOURCES

    All required learning resources will be made available to you on the course moodle.

    Other Information:

    The course timetable clearly identifies which Saturdays are workshops and which are designated online sessions.

    Online sessions can be completed at a time and place that suits you. Your teacher will guide your learning and tasks during the online weeks.

    Your teacher will supplement campus workshops with online webinars that are recorded for your convenience.

    Your teacher will also be available to answer questions, engage learners at a set day/time during the scheduled online week.

    Once you are enroled you have up to 18 weeks to complete the course work. You will be required to do approximately 10 to 12 hours per week on set activities and assessment tasks each week.

    This is a fast paced course that requires you to work each week and manage your time effectively.

    INFORMATION SESSION

    Attend the following information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Wednesday 25th July 2018 at 06:00pm at St.George Campus, Cnr Princes Highway & President Avenue, Building F, Lower Ground Floor, Room FLG19.

    If you want to find out whether this course best suits your career plan, please attend.

    NOTE workshops are held at St George campus once you enrol. Duration: 18 weeksDid you know as a TAFE NSW student you have unlimited access to Lynda.com which is an online library of video courses in software, design, technology, communication, learning and business. These skills can help you to achieve your study goals. Visit the Student Portal to get started.

    Units of Study

    CodeNameStart DateEnd DateCensusAmount
    UOS VSL-Diploma of Work Health and Safety 2018/08/062018/09/142018/09/03$950.00
    UOS VSL-Diploma of Work Health and Safety 2018/09/172018/10/262018/10/02$950.00
    UOS VSL-Diploma of Work Health and Safety 2018/10/292018/12/072018/12/03$950.00

    Subjects

    NumberSubject nameNominal hours
    BSBWHS408Assist with effective WHS management of contractors30
    BSBWHS506Contribute to developing, implementing and maintaining WHS management systems50
    BSBWHS510Contribute to implementing emergency procedures40
    BSBWHS503Contribute to the systematic management of WHS risk40
    BSBWHS505Investigate WHS incidents50
    BSBWHS502Manage effective WHS consultation and participation processes40
    BSBHRM509Manage rehabilitation or return to work programs50
    BSBWHS508Manage WHS hazards associated with plant60
    BSBWHS504Manage WHS risks50
    Part Time Evening
    Course start:
    Mon 12 Feb 2018
    Course duration:
    18 Weeks
    Financial Assistance:
    VET Student Loan
    Attendance:
    6 Hours per week
    Code:
    BSB51315R1-01V01-18ULT-101
    View details
    About offering:

    INFORMATION SESSION

    Attend the following information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Tuesday, 30 January 2018, at 6:00pm at Ultimo College, Harris Street, Building G, Level 4, Room G4.16.

    Indicative timetable:

    You will need to attend approximately 6 hours of class a week over 2 days. An indication of how your weekly timetable may look is: Monday and Wednesday, 5:30pm to 8:30pm.

    How to enrol or apply:

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    PAYMENT OPTIONS AND ASSISTANCE

    This course is approved for a Commonwealth VET Student Loan (VSL). If you meet the VSL eligibility and academic suitability requirements, you are able to apply to the Commonwealth for a loan to cover all or part of your course fee. We will ask you whether you would like to apply for a VET Student Loan when you enrol and advise you of the process.

    Find out more about VET Student Loans at http://studyassist.gov.au/sites/studyassist/vet%20student%20loans/pages/vet%20student%20loans

    Direct payment by Unit of Study instalments is available for this course.

    The Units of Study and associated fees for this course are detailed below. Fees are charged on the census day for each unit of study. To secure a loan for part or all of your course, you must be eligible and submit a valid application to the Commonwealth for a VET Student Loan. You may withdraw prior to the census date without incurring a fee.

    Find out about recognition: http://www.sydneytafe.edu.au/courses/recognition

    READ BEFORE YOU ENROL

    Fees, payment and refunds: http://www.sydneytafe.edu.au/courses/fees-and-charges

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    Units of Study

    CodeNameStart DateEnd DateCensusAmount
    UOS VSL-Diploma of Work Health and Safety 2018/02/122018/04/132018/03/05$2260.00
    UOS VSL-Diploma of Work Health and Safety 2018/02/122018/04/132018/04/03$2260.00
    UOS VSL-Diploma of Work Health and Safety 2018/04/302018/07/062018/06/04$2260.00

    Subjects

    NumberSubject nameNominal hours
    BSBWHS408Assist with effective WHS management of contractors30
    BSBWHS506Contribute to developing, implementing and maintaining WHS management systems50
    BSBWHS510Contribute to implementing emergency procedures40
    BSBWHS503Contribute to the systematic management of WHS risk40
    BSBWHS505Investigate WHS incidents50
    BSBWHS502Manage effective WHS consultation and participation processes40
    BSBHRM509Manage rehabilitation or return to work programs50
    BSBWHS508Manage WHS hazards associated with plant60
    BSBWHS504Manage WHS risks50
    Course start:
    Mon 12 Feb 2018
    Course duration:
    18 Weeks
    Financial Assistance:
    Smart & Skilled, VET Student Loan
    Attendance:
    6 Hours per week
    Indicative course cost:
    $2850
    Code:
    BSB51315R1-01V01-18ULT-001
    View details
    About offering:

    INFORMATION SESSION

    Attend the following information session to meet with the teaching staff, discuss the course and get more information about enrolment and next steps.

    Tuesday, 30 January 2018, at 6:00pm at Ultimo College, Harris Street, Building G, Level 4, Room G4.16.

    Indicative timetable:

    You will need to attend approximately 6 hours of class a week over 2 days. An indication of how your weekly timetable may look is: Monday and Wednesday, 5:30pm to 8:30pm.

    How to enrol or apply:

    To apply for this course you must meet the Smart and Skilled eligibility criteria: http://www.sydneytafe.edu.au/courses/smart-skilled

    GET YOUR UNIQUE STUDENT IDENTIFIER (USI)

    Before you enrol you must have a Unique Student Identifier (USI). Visit http://www.usi.gov.au/students/create-your-usi to request a USI. Remember to add Sydney TAFE to your account via the Manage Permissions page (code: 90003, name: TAFE NSW - Sydney Institute).

    Find out more about applying and enrolling: http://www.sydneytafe.edu.au/courses/applying-and-enrolling

    Fee information:

    SMART AND SKILLED FEES

    Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process.

    For further information about eligibility and explanations of the different fee categories, visit http://www.sydneytafe.edu.au/courses/smart-skilled.

    PAYMENT OPTIONS AND ASSISTANCE

    This course is approved for a Commonwealth VET Student Loan (VSL). If you meet the VSL eligibility and academic suitability requirements, you are able to apply to the Commonwealth for a loan to cover all or part of your course fee. We will ask you whether you would like to apply for a VET Student Loan when you enrol and advise you of the process.

    Find out more about VET Student Loans at http://studyassist.gov.au/sites/studyassist/vet%20student%20loans/pages/vet%20student%20loans

    Direct payment by Unit of Study instalments is available for this course.

    The Units of Study and associated fees for this course are detailed below. Fees are charged on the census day for each unit of study. To secure a loan for part or all of your course, you must be eligible and submit a valid application to the Commonwealth for a VET Student Loan. You may withdraw prior to the census date without incurring a fee.

    Find out about recognition: http://www.sydneytafe.edu.au/courses/recognition

    Financial assistance: http://www.sydneytafe.edu.au/courses/financial-assistance

    Units of Study

    CodeNameStart DateEnd DateCensusAmount
    UOS VSL-Diploma of Work Health and Safety 2018/02/122018/04/132018/03/05$950.00
    UOS VSL-Diploma of Work Health and Safety 2018/02/122018/04/132018/04/03$950.00
    UOS VSL-Diploma of Work Health and Safety 2018/04/302018/07/062018/06/04$950.00

    Subjects

    NumberSubject nameNominal hours
    BSBWHS408Assist with effective WHS management of contractors30
    BSBWHS506Contribute to developing, implementing and maintaining WHS management systems50
    BSBWHS510Contribute to implementing emergency procedures40
    BSBWHS503Contribute to the systematic management of WHS risk40
    BSBWHS505Investigate WHS incidents50
    BSBWHS502Manage effective WHS consultation and participation processes40
    BSBHRM509Manage rehabilitation or return to work programs50
    BSBWHS508Manage WHS hazards associated with plant60
    BSBWHS504Manage WHS risks50

     

     

    Got questions? Need help?

    Scholarships

    Female students at Sydney TAFE

     

    A scholarship can help with fees and related study expenses.
    Find out if you are eligible.